SafariSack 4.2 Khaki (Buckwheat filled)

  • Sale Price: $40.95
  • Availability: Usually ships in 24 hours

Feature

  • New Design (July 2014)!!
  • The original SafariSackTM has been in production for over ten years. It has been duplicated by others, but as they say, "copying is the best form of flattery." However, we felt it was time to tweak this timeless design. We have redesigned the bag with the following changes compared to the SafariSack I:
  • A side gusset, providing a thicker volume of beads when folded over saddlebag style. A slightly smaller overall profile, yet thicker where it counts in the center. Instead of stitching the rubberized-type fabric end to end with the nylon fabric, we have overlaid it on top of the nylon fabrics for much stronger seams and less chance of blow outs.
  • Now available in khaki or the classic black (the bottoms are black on both models). Slightly rounded ends for easier handling. D-rings on the ends for easier carrying over the shoulder with an optional shoulder strap. A new smaller sack for shorter glass...the 1.4 model.
  • Designed & Crafted in the USA

Product Description

FEATURES
Zippered compartment - the filler can be dumped directly inside without the need for a liner. The bottom has a rubberized-style fabric that keeps the sack in place when placed on a vehicle or other slick surface.
Drape a SafariSack 4.2 over the edge of a partially raised car window, and you have a steady camera support.
On the safari, it is often used in the flat mode, on top of the RangeRover. With the sewn-in quick-release strap, it can be securely fastened to the rack on the top of the vehicle.
Constructed of a combination of 400-denier and 420-denier Diamond Ripstop nylon fabrics. These tough fabrics are supplemented by SlipNot, a rubberize-type fabric.
Sewn-in hand grab strap. Also use the Y208 (sold as an "add-on" with the old SafariSacks) will clip to the hand strap of this bag extending it for use when you want to use it as longer tie down to the top of a vehicle or as a narrow (20mm) shoulder strap.
D-rings on the end for attaching nearly any shoulder strap or the optional Y215 (25mm wide) Unpdadded Shoulder Strap.
The SafariSackTM 4.2 can be used in three modes:
1) Flat, to support a camera on the ground or on top of a Land Rover or other vehicle.
2) Saddlebag style, by using the two cinch straps for the "folded-in-half" position. (In this mode we recommend only filling the bag about 2/3 full). A camera can be snugly cradled on top, when the bag is placed over a car window or used on the ground for additional elevation.
3) Ballast, adding one of two sacks to your tripod increases stability when using long lenses or in windy conditions. Filled with sand or water, it can be used as a weight to stabilize light stands or booms.
SPECIFICATIONS
Flat dimensions: 24 x 40 cm (9.4 x 15.7")
Empty weight: 144 g (5.0 oz.)
Buckwheat filled weight (including the sack): 660 g approx. (23 oz. approx.)
Kinesis Sku # R428-H00

Product Detail

Customers Who Viewed This Item Also Viewed

Comments

Write a Reply or Comment:

Your email address will not be published.*